The Samsung Galaxy Watch is the latest in smartwatches. With its built-in ECG sensor and blood pressure monitor, it’s a fitness tracker that can help you live healthier. Here are the basics to getting these features up and running on your watch.
The Galaxy Watch 4 can now take your ECG and blood pressure, but it requires you to be in the right position for data collection. Here’s how to enable these features on non-Galaxy watches.The Galaxy Watch 4 has many capabilities, such as blood pressure and ECG tracking. These features require a compatible device that is on the market now or will be soon. The user must enable these sensors through their phone settings before they can use them on the watch.
The “galaxy watch 4 ecg not working” is a problem that people are having with the Galaxy Watch 4. The issue can be fixed by following these steps.
The Galaxy Watch Active 2 was the first to have ECG, and the Galaxy Watch 3 followed suit with blood pressure monitoring. These two functions, however, are not accessible in every nation on the planet. This is most likely due to differing regulatory regimes. Furthermore, the Samsung Health Monitor (SHM) app, which is exclusively compatible with Samsung phones, is required for these two functionalities to function. Fortunately, thanks to dante63, an XDA Developers member, you may now utilize these functions. He made changes to the Samsung Health Monitor app to eliminate the limitations. So, in this article, I’ll show you how to activate ECG and Blood Pressure monitoring on the Galaxy Watch 4 and Galaxy Watch 4 Classic step by step. Because Tizen OS is used by Active and Galaxy Watch 3, this approach will not work.
If you’d rather watch a video, you may learn how to acquire ECG and BP on the Galaxy Watch 4 by watching the video below.
Two applications are required to allow ECG and blood pressure reading on the Galaxy Watch 4 Classic.
- https://drive.google.com/file/d/1uDOC2Cd38ANHfuxSbn6Tx7w-qud-Z4eT/view (Download and install on phone)
- https://drive.google.com/file/d/1cHxBxR7Ow B7YZrQouUIgVZzu F-bI J/view (Place in the wristwatch)
The first app file will be downloaded and installed on your phone, while the second apk file will be downloaded and installed on your smartwatch.
Section 1: Download and install the Samsung Health Monitor app on your phone.
To download and install the modified Samsung Health Monitor app on your phone, just click the link above. Then put it in place. Don’t open it yet; we need to install the modified SHM software on the watch first, then you can use the SHM app on your phone to set up ECG and blood pressure.
Install Samsung Health Monitor on the Galaxy Watch 4 in Section 2.
To finish this phase of the procedure, we’ll go through a few steps to install the modified SHM software on the Galaxy Watch 4. To install SHM on the watch, we’ll need the Bugjeager software. Install the software from the Google Playstore; it will assist in the installation of the updated SHM app on the watch. However, first and foremost,
-
- Step 1: On the watch, open the Settings app.
-
- To begin, open the settings app.
- Step 2: Scroll down to the “About watch” section and press it to open it.
-
- Scroll down to the section about watches.
- Step 3: Scroll down to the program section and press the open button.
-
- To launch software, scroll down and touch it.
- Step 4:To activate developer mode, scroll down to the software version and press on it many times. If you followed the steps properly, you should notice “developer mode switched on.”
-
- To activate developer mode, tap on the software version numerous times.
- Step 5: Return to the settings app’s main menu and scroll up to connections, then press to open it.
-
- Return to the Settings app and choose Connections from the drop-down menu.
- Step 6: Select Bluetooth from the drop-down menu and turn it off.
-
- Turn Bluetooth off.
- Step 7: If Bluetooth is switched off, go back and press on WiFi to turn it on. It’s important to note that your phone and the Galaxy Watch 4 must be connected to the same WiFi network. Check to see whether it says linked.
-
- Turn on Wi-Fi. Both the phone and the watch must be connected to the same Wi-Fi network.
- Step 8: If you’ve enabled WiFi, return to the settings app’s main menu and scroll down to developer options. To open it, just tap it.
-
- Step 9: Scroll down to “ADB debugging” and activate it. Enable “debug over WiFi” as well. After a few moments, you should see your WiFi network’s IP address. Make a mental note of it; you’ll need it later.
-
- Debug over Wi-Fi by turning on ADB debugging. Take down the IP address (underlined)
- Step 10: As previously stated, the Bugjeager software is required to install the SHM app on the Galaxy Watch 4 Classic. So, download the Bugjeager app from Google Playstore and launch it. To continue, open the Bugjeager app and accept the privacy policy. To add your WiFi IP address, hit the + symbol with a plug next to it.
-
- Enter the IP address you made a mental note of previously.
- Step 11: Copy and paste the WiFi IP address you wrote down earlier into the box, then hit Connect. If you’ve connected successfully, your IP address should change to “no device selected.”
-
- The app is linked to the same wifi network as the Samsung Galaxy Watch 4.
- Step 12: Then, at the top of the app, touch the add symbol and pick apk file. Locate and pick the SHM apk for the watch that you already loaded. To install the SHM on the watch, press OK.
-
- Select the watch SHM by tapping the plus symbol.
The Bugjeager app will take some time to install SHM on the watch. If the app was properly installed, you should be able to view it on your watch. The SHM app on the watch will display a “m” in the logo, indicating that it is the modified version.
The watch has been successfully setup with SHM.
If the app was not installed for whatever reason, just hit the three dots on the Bugjeager app and choose restart server. Then go back to step one and connect to WiFi. 
Return to your phone and start the SHM app if SHM has been successfully loaded on your Galaxy Watch 4 Classic. To set up and activate ECG and blood pressure monitoring on the Galaxy Watch 4 or Galaxy Watch 4 Classic, follow the system instructions.
Please keep in mind that you should never make a medical choice based on the results of any of these apps’ metrics. Before making any medical decisions, always seek the advice of a knowledgeable specialist.
Related
The “ecg galaxy watch 4” is a feature that will be enabled on the Galaxy Watch 4.
{“@context”:”https://schema.org”,”@type”:”FAQPage”,”mainEntity”:[{“@type”:”Question”,”name”:”Can Galaxy Watch 4 measure blood pressure?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:””}},{“@type”:”Question”,”name”:”How do I put my BP lab on my Samsung Galaxy watch?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A: You can first use the Samsung Gear app to pair your phone with your watch. After that youll need to head on over to Beat Sabers settings, go into options and select Pair Lab. Alternatively you can also just press on the top left corner of the game screen where it says BP”}},{“@type”:”Question”,”name”:”How do I turn on Samsung health monitor?”,”acceptedAnswer”:{“@type”:”Answer”,”text”:”A: To turn on your Samsung health monitor, press the power button for around five seconds.”}}]}
Frequently Asked Questions
Can Galaxy Watch 4 measure blood pressure?
How do I put my BP lab on my Samsung Galaxy watch?
A: You can first use the Samsung Gear app to pair your phone with your watch. After that youll need to head on over to Beat Sabers settings, go into options and select Pair Lab. Alternatively you can also just press on the top left corner of the game screen where it says BP
How do I turn on Samsung health monitor?
A: To turn on your Samsung health monitor, press the power button for around five seconds.
Related Tags
- how to measure blood pressure on galaxy watch 4
- samsung health monitor app ecg
- galaxy watch 4 blood pressure accuracy
- samsung health monitor app blood pressure
- samsung health monitor ecg